low cost smt dual band diplexer DP52-0004 m/a-com division of amp incorporated north america: tel. (800) 366-2266, fax (800) 618-8883 asia/pacific: tel.+85 2 2111 8088, fax +85 2 2111 8087 europe: tel. +44 (1344) 869 595, fax+44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice. v1.00 features ? small size and low profile ? industry standard sow-16 smt plastic package ? superior repeatability ? passbands 400-700 mhz and 1100-1940 mhz ? typical passband insertion loss: 0.5 db ? 2 watt power handling ? low cost description m/a-com?s DP52-0004 is an ic-based monolithic diplexer in a low cost sow-16 plastic package. this diplexer is ideally suited for applications where small size, low insertion loss, superior repeatability and low cost are required. typical applications include wmt/pcs and dual mode portable devices. the DP52-0004 is fabricated using a passive-integrated circuit process. the process features full-chip passivation for increased performance and reliability. 400mhz/1100-1940mhz typical electrical specifications 1 , t a = +25c parameter units min typ max passband insertion loss db ? 1.8 2.8 stopband isolation db 21 30 ? passband vswr ? ? 1.88 2.06 1. all specifications apply with a 50-ohm source and load impedance. low cost smt dual band diplexer 400-700/1100-1940 mhz DP52-0004 ordering information part number package DP52-0004 s0w-16 lead plastic package DP52-0004-tr forward tape and reel 1 1. if specific reel size is required, consult factory for part number assignment. sow-16
low cost smt dual band diplexer DP52-0004 m/a-com division of amp incorporated north america: tel. (800) 366-2266, fax (800) 618-8883 asia/pacific: tel.+85 2 2111 8088, fax +85 2 2111 8087 europe: tel. +44 (1344) 869 595, fax+44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice. v1.00 1. exceeding these limits may cause permanent damage. absolute maximum ratings 1 parameter absolute maximum input power 2 w cw operating temperature - 40 c to +85 c storage temperature -65 c to +150 c functional diagram recommended pcb configuration insertion loss vs frequency typical performance @ +25 c vswr vs frequency insertion loss and rejection vs. frequency -60 -50 -40 -30 -20 -10 0 200 680 1160 1640 2120 frequency (mhz) insertion loss and rejection (db) vsw r vs. frequency 1 1.25 1.5 1.75 2 2.25 2.5 2.75 3 200 680 1160 1640 2600 frequency (mhz) vswr
|
